0

← Back to VGC Master Class

How to Choose an APRS Radio: Built-in TNC, Handheld vs Mobile

An APRS radio is a station that can send and decode APRS packets, not a radio that merely sits on the local packet frequency. You can get there with a radio that already has a TNC built in, or with an ordinary FM radio plus a hardware or software modem. A handheld and a mobile are different jobs, and a better antenna will often do more for being heard than swapping one badge for another. If you still need the meaning of APRS itself, start with our explanation of what APRS is in ham radio.

What people mean by “APRS radio”

People use “APRS radio” as shorthand for a station that can encode and decode APRS packets, usually because a TNC — the modem — is built into the radio or attached to it.

A radio that can be tuned to the local APRS frequency but has no modem is not, by itself, an APRS radio. It can still get on APRS if you add a hardware TNC or a software modem.

Beaconing a position is only one job. A full station can also decode other stations and, on many setups, exchange short messages. Some devices are mostly trackers: they send a location and not much else. That is fine for some jobs, but not the same as a station you can operate.

A built-in TNC, or the radio you already have plus a modem

A radio with a built-in TNC — and often a GPS — can beacon without a computer attached. Set the local APRS frequency, set your callsign, and you are on the air.

If you already have a 2-metre FM radio, you do not necessarily need a new one. Add a hardware TNC and run a map or APRS app on a phone or a computer. A Bluetooth KISS TNC, such as a Mobilinkd, is the add-on most operators will recognize. The phone often supplies the GPS and the map. A software TNC — Dire Wolf on a computer, or a phone app acting as the modem — is the same idea with no extra box, and a bit more setup.

Some current radios have a hardware KISS TNC built in, and they can also talk to an app over Bluetooth. A handheld such as a VR-N76 is one example, as is a mobile with an integrated KISS TNC, such as a VR-N7600 or a headless VR-N7500. If you already have a VR-N76, the KISS TNC walkthrough and the Bluetooth APRS setup guide cover the connection.

“Bluetooth” on a radio can mean audio and PTT, a programming or control link for an app, or a KISS data link that carries APRS packets to a map or packet app. Only that last meaning is the APRS-modem path. The note on wireless KISS TNCs explains the data-link case in more detail.

Handheld, mobile, or a GPS mic or tracker

Handheld

A handheld makes sense when you want something you can carry: a hike, a public-service event, a club net, or a radio you can also throw on the passenger seat. Power is lower than a mobile. A dual-band handheld with a built-in TNC, such as a VR-N76, is a 5, 2, and 1 watt radio, and the stock rubber duck is usually the weak point. A decent aftermarket antenna will do more than a few extra watts on that same duck.

Well-known all-in-one handhelds from other makers include the Kenwood TH-D75A and the Yaesu FT-5D. A plain FM HT plus a Bluetooth TNC will also do the job. If you already have a VR-N76, the complete APRS setup guide walks through turning APRS on.

Mobile, in the vehicle

An APRS mobile radio makes sense when the station will live in a car, a truck, or a fixed 12-volt install. You get more power — a 50 W-class VHF mobile is typical — and, more important, a real antenna on the roof or a mag-mount.

Some mobiles have a conventional control head. Some hide the body and put the face on a phone, a tablet, or a microphone with a screen. A headless 50 W-class VHF mobile, such as a VR-N7500, is designed to be tucked away and used from the phone. The smartphone provides GPS over Bluetooth, so if the phone is off or unpaired, this setup will not beacon a position. A mobile with a color LCD microphone, such as a VR-N7600, can be used from the mic when the phone is not in your hand; GPS and a compass are built into that radio.

A GPS mic, or a dedicated tracker

Sometimes the missing piece is not a new radio, but a position source, especially when the radio body is under a seat or in a trunk. A wireless speaker mic with its own GPS, such as a BHM-88, is a GPS mic and a position source for a host radio. It works with the VR-N76, VR-N7500, VR-N7600, and the BTECH UV-PRO. It is an accessory, not a standalone APRS transmitter.

Dedicated trackers — small boards used for balloons, bikes, or unattended payloads — often only transmit. If you need to hear other stations, you want a radio and a TNC, not only a beacon. This is not a tracker-buyer’s guide.

Features that actually change the choice

GPS source. The position can come from the radio, from a mic, or from a phone. Built-in GPS is simpler if you want the radio to beacon when no phone is attached. A headless radio that uses the phone for GPS will not beacon a position if the phone is off or unpaired.

Messaging, and where you read it. Composing a short message on a radio keypad is a different habit from doing it in an app. Some all-in-one radios let you work messages on the radio itself; others put the map and the message window on a phone or a tablet.

KISS / Bluetooth access. A built-in KISS TNC is useful if you want a third-party map or packet app without a separate modem box. The data link is what matters, not the word “Bluetooth” on a feature list. If you already have a VR-N76, the KISS TNC how-to walks through using it.

Power and antenna. A 5-watt handheld and a 50 W-class VHF mobile are different classes. Within the same class, a rooftop or mag-mount antenna will usually do more for being heard than swapping one radio for another. Budget for the antenna. Set the local APRS frequency for your region; do not assume a factory default is correct.

SmartBeaconing. Some radios and apps can raise or lower the beacon rate with speed and turns, which is easier on the shared channel than a fixed one-minute ping. The VR-N76, for example, supports SmartBeaconing; the SSID, path, and SmartBeaconing guide covers how to set it. Path and SSID belong in that guide, not here.

What I’d pick, depending on what you’re doing

If you already have a 2-metre FM radio and just want to get on APRS, add a TNC or a software modem and an app. You do not necessarily need a new radio.

If you want one handheld you can take walking, to an event, or on a trip, look for a built-in TNC and a GPS in the radio itself, then a decent aftermarket antenna. A handheld such as a VR-N76 is one example of that type; it is not the only one.

If APRS will live in the vehicle, get a mobile and a proper antenna first. Then decide how you want to operate it: a microphone with a screen, a phone or tablet as the face, or a conventional head.

If the radio body will be hidden and you need a position source, look at a GPS mic or an external GPS, not another radio body.

If you only want to watch a map, you do not need a transmit-capable APRS radio, and you do not need a license to look. Sites such as aprs.fi are maps of traffic that has reached the internet, not the network itself. You do need an amateur license to transmit.

If you already have the radio and just need to turn APRS on, use a setup guide rather than this page: the complete APRS setup guide for the VR-N76, the SSID, path, and SmartBeaconing guide for the VR-N76, the KISS TNC tutorial for the VR-N76, or the Bluetooth APRS setup guide for the VR-N76. The official project site is aprs.org.

Frequently asked questions

Is any radio on the APRS frequency an APRS radio?

No. A radio that can only be tuned to the local APRS frequency, with no TNC of its own and no modem attached, cannot send or decode APRS by itself. An APRS radio is a station that can encode and decode those packets, because a TNC is built in or one is attached. For the protocol itself, see the definition of APRS in ham radio.

Do I need a special radio, or can I use the one I already have?

You do not necessarily need a purpose-built APRS radio. If you already have a 2-metre FM transceiver, you can add a hardware TNC — including a small Bluetooth KISS TNC — or run a software TNC on a phone or computer.

Built-in TNC or add-on — which should I get?

Get a built-in TNC if you want to encode and decode APRS without a computer attached. Beaconing a position still needs a position source — in the radio, in a mic, or from a phone. If the GPS comes from the phone, the station will not beacon a position when the phone is off or unpaired. Add a TNC or a software modem if you already have a radio you like.

Handheld or mobile?

Choose a handheld if you need something you can carry — walking, an event, or a radio that is only sometimes in a vehicle. Choose a mobile if APRS will live in a car or a 12-volt install, where a proper outside antenna usually matters more than a few extra watts. A handheld can still work in a vehicle with a good mobile antenna; a mobile is awkward to hike with.

Do I need an amateur license to transmit APRS?

Yes, in nearly every country, because APRS uses amateur bands. Watching a public map does not require a license. In-stock amateur radios of this kind are for licensed amateur (FCC Part 97) use. For the basics, see our guide to what ham radio is.

Does the radio need the internet?

No, not for radio-to-radio work. Nearby stations can decode packets directly, with no cell service and no internet. Maps and some longer-distance messages need a path through an IGate to APRS-IS; the APRS explainer covers that distinction. APRS itself has no APRS usage fee; that is not the same as saying maps and internet access are always free, or always available.

Does GPS have to be inside the radio?

No, but you need a position source somewhere if you want to beacon a location — the radio, a mic, or a phone, depending on the setup. A headless radio that takes GPS from the phone will not beacon a position if the phone is off or unpaired.

This page is a chooser, not a setup manual. For the meaning of APRS, APRS-IS, and the maps, use the definition of APRS in ham radio.