0

Vero Telecom VR-N76 Beta Firmware Update v0.9.6-1 Release & Guide

Oct 30, 2026

VR-N76 Beta Firmware Update

Beta · v0.9.6-2

VR-N76 Beta Firmware v0.9.6-2 adds a dedicated scan submenu, more control over channel and zone data, and 8.33 kHz frequency scanning. It also fixes issues affecting APRS altitude reporting, the zone selector’s selected state, and time synchronization from the phone to the radio.

Compatible radio Vero Telecom VR-N76
Firmware version v0.9.6-2 Beta
Release date 2026-11-18
Test invitation code 510962

New Features & Improvements

Scan controls

  • A new Scan submenu in the main menu brings scan options together, including scan resume and background scan zone settings.
  • A scan zone can also be selected from Radio Settings.
  • Frequency scanning now supports an 8.33 kHz step.

Channel and zone data

  • Clear channel and zone data from the radio.
  • Edit zone names on the device.
  • Set a master password to lock channel data and restrict transmission to low power.
  • Channel data sync with the HT App now includes zone names, channel lock status, and master password settings.

Keypad and display settings

  • Configure whether volume can be adjusted while the keypad is locked.
  • Set an automatic keypad lock timeout.
  • Choose to show the channel name and frequency at the same time.
  • Configure the new “8.33 kHz Display Name” option.

PTT DTMF and sync fix

  • Send DTMF signaling when PTT is pressed.
  • Fixed an issue where time synchronization from the phone to the radio did not work.

Bug Fixes

  • Fixed an issue where APRS sent “-0” for altitude when the current altitude was 0.
  • Fixed an issue where the channel group (zone) selector did not immediately update its selected state after a change.
Beta Test Invitation Code
510962

This is test firmware. Please report unexpected behavior to Vero Telecom Support.

Known Issues

Beta firmware notice

Known issues for this version have not been confirmed. Add confirmed issues here before publication, or state that none are currently known after technical verification.

Compatibility

This firmware is for the Vero Telecom VR-N76. Compatibility with other radio models has not been confirmed. Check the model shown in the HT App before starting the update.

Before Updating

  • Confirm the radio model and note its current firmware version.
  • Charge the radio before starting the update.
  • Keep the phone close to the radio and maintain a stable Bluetooth connection.
  • Do not disconnect the radio or close the HT App while the update is in progress.
  • Back up or record important channel and zone information before changing firmware or clearing data.

How to Install the Beta Firmware

  1. 1
    Pair the VR-N76 with the HT App.
  2. 2
    Open the radio’s device settings and locate the firmware version.
  3. 3
    Select Experience Beta Firmware.
  4. 4
    Enter invitation code 510962.
  5. 5
    Follow the prompts in the app and keep the radio connected until the update finishes.
  6. 6
    Reconnect the radio in the HT App and confirm that the displayed version is v0.9.6-2.

If the Update Fails

If the app reports an error or the update does not complete, keep the radio powered on and follow the recovery instructions shown in the HT App. Do not repeatedly disconnect or restart the radio during an active update.

If the radio does not reconnect or the update cannot be resumed, contact support with the radio model, current firmware version, phone model, HT App version, and a screenshot of the error.

Feedback & Support

When reporting a problem, include the steps to reproduce it and your radio, phone, and app versions.

Technical Review
Technical content verified by
VERO TELECOM
Last verified
2026-11-18
Firmware version checked
v0.9.6-2 Beta

<< Vero Telecom BHM-79 Beta Firmware Update v0.3.12-1 Release & Guide

>> Vero Telecom VR-N7600 Mobile Station Beta Firmware Update Guide