VERO 50W Dual Band Mobile Radio VR-6600PROItem NO.: VR-6600PRO

SEPARATE FRONT LCD PANEL AND DTMF MICROPHONE

The VR-6600PRO has a front panel that is separated from the main radio body. The panel is connected with standard Ethernet cable (15' included) allowing the radio body to be remotely (or trunk) mounted. The Front Panel includes several mounting accessories including a suction cup mount.

The Front Panel has a built-in microphone which allows you to either use either the included DTMF Microphone or Panel Microphone. The Separate DTMF microphone can also be plugged directly into the Main Radio Body.

REAR OF THE REMOTE HEAD - MULTIPLE AUDIO OPTIONS

The VR-6600PRO includes separate volume adjustments for the independent VFOs. The VR-6600PRO has dual speakers in the LCD panel - allowing stereo audio when one station is being received, but separate monaural speakers when both VFOs are active - which are controlled by the separate volume knobs. A third speaker is located on the radio body - which can be set as the only speaker, simultaneously be used with the panel speakers, or can be unused as well.

The VR-6600PRO has both line-in and line-out jacks that allow you to output the radio audio to your own speaker system. The VR-6600PRO allows you to listen to a line-in source while still monitoring your local nets.

The Front Panel includes several mounting accessories including a suction cup mount. (Uses a Ram Ball Mount)

WIDEBAND RECEIVER

The VR-6600PRO was includes a wide receiver that can receive beyond the transmitting frequencies on VHF/1.25M/UHF.

The VR-6600PRO can also receive:

.5-1.71MHz (AM Radio)

76-108MHz (FM Radio)

108-135.995MHz (Air Band (AM))

136-250MHz

300-399.995MHz

400-520MHz

THOROUGH QUALITY CONTROL

Each VR-6600PRO is individually tested during extreme temperatures (-22 F) to ensure every radio can meet advertised performance requirements.

The VR-6600PRO can endure harsh environments and still perform in the most extreme situations.

CROSSBAND REPEATER

The VR-6600PRO is more than just a radio - it can also act as a full cross-band repeater! Allowing you to connect or extend the range of your repeaters, handhelds, and mobiles. The Cross-Band repeater works in between VHF and UHF frequencies.